asi210
Weight Indicator
asi210 is a weight display and transmission unit that combines precision with high accuracy, customized for heavy industrial control processes. In addition to its minimal dimensions that provide advantage and ergonomics in panel assembly, it is an indispensable solution with its price-performance ratio.
It offers the possibility of commissioning and testing in series with the electronic calibration option without using test weights. It shows its classic attitude with its 6-digit LED indicator that provides a clear view.
It also gives information about its status with Zero, Motion, Tare, Net, Unit LEDs. It sends the weighing results to external units via the optically isolated RS485 with Modbus-RTU format.
- 24-bit weight conversion precision
- 8-step filter providing high noise suppression,
- Electronic calibration
- Manuel Zero
- Automatic Zero tracking, automatic reset at power-on
- Motion detection
- Automatic tare saving at closing
- Access to all parameters via front panel or serial communication
- User-friendly menu structure
- Ability to use all bridge type sensors
- 6-digit LED display
- 31 asi210s can be used with a single RS485 line
- 18-36VDC wide input voltage range
- Panel type with 72mm*36mm*65mm (W*H*D) dimensions
- General purpose weight display
- Concrete plant
- Asphalt plant
- Bagging
- Dosing
- Packaging
- Liquid and solid filling
| Weight Converter | |
| Accuracy Class: | III |
| EU Compliance: | ≤10 000 divisions |
| A-D Converter: | 24-bit low-noise Delta-Sigma |
| Resolution: | Max 100 000 steps |
| Conversion Rate: | Max 512 Conversions/Second |
| Linearity: | ≤ 0.0020TS% |
| Minimum Input Sensitivity: | 0.3uV/e for legitimate commercial applications |
| Input Level: | ≤ ±15 mV |
| Zero Deviation: | ≤ ±3ppm/ ºC |
| Gain Deviation: | ≤ ±6ppm/ ºC |
| Load Cell | |
| Number: | ≤ 6 pcs 350 Ohm |
| Output Level: | 2 mV/V or 3 mV/V |
| Excitation: | 5VDC/100mA |
| User Interface | |
| Display: | 6 digits LED |
| Status indicators: | Zero, Motion, Clear, Unit |
| Keys: | High strength 4 pcs. |
| Programming and Calibration | |
| Digital Filter: | 8 steps |
| Calibration: | Selectable Electronic or Etalon weight |
| Weighing Functions: | Reset, Zero Tracking, Reset at Power-on, Tare |
| EIA RS485 Communication | |
| Format: | Modbus RTU |
| Speed: | 9600-115200 bps |
| Isolation: | 1500 Volt optical |
| General | |
| Power Input: | 18-36 VDC |
| Power Consumption: | Max 3VA |
| Operating Temperature: | -10ºC / +40ºC |
| Storage Temperature: | -25º C /+70ºC |
| Dimensions: | 72*36*53 mm (W*S*D) |
| Weight: | 70 Grams |