TMC742
TMC742; It is an all-in-one two-axis motion control device for electrical, hydraulic and pneumatic systems, which has emerged as a result of Bilkon's experience in the design and production of control devices since its establishment.
The TMC742 is a real-time control unit with a conversion rate of 200 Hz and reads basic system variables such as weight, elongation, velocity, pressure, etc., within a period of 5 milliseconds. It obtains the controlled variable by using software filters designed according to the system requirements and creates the appropriate output signal with powered by fuzzy logic PID (Fuzzy-PID) control algorithm.
With TMC742
Connection directly to a wide range of analog and digital sensors without the use of external signal converters...
×
Analog Signal Converter
- 4 channels with simultaneous conversion
- Programmable features of each channel
- 19 bit resolution
- Absolute or Proportional conversion and Selectable gain
- Conversion and Display Speed
- Filter parameters
- 5VDC and 12 VDC sensor supply voltage
- 2-12 point calibration to correct the deviations caused by the applied system or calibration with previously saved values
- Load, Force, Pressure, Strain, Elongation etc. direct connection to a wide variety of sensors
×
| Each Channel Analog Front End | |
| Accuracy Class: | III, ≤10 000 divisions at 10 samples/s |
| A-D Converter: | 24-bit low-noise Delta-Sigma |
| Resolution: | Max 100 000 steps |
| Conversion Rate: | Max 1024 Conversions/Second |
| Linearity: | ≤ 0.0020TS% |
| Minimum Input Sensitivity: | 0.3uV |
| Input Level: | Max ±15 mV |
| Zero Deviation: | ≤ ±3ppm/ ºC |
| Gain Deviation: | ≤ ±6ppm/ ºC |
| Sensor Excitation: | 5VDC/25 mA, 12VDC/50mA |
| Human Machine Interface(HMI) | |
| Display: | 18-bit, 800*480 TFT |
| Activektif Area: | 86*154 mm (H*L) |
| Color: | 18-Bit RGB |
| Touch: | High strength 4-Wire Resistive |
| Keys: | High strength 4 pcs. |
| Programming and Calibration | |
| Digital Filter: | 8 steps |
| Calibration: | Selectable 2-12 points or previous saved values |
| Parameters: | Local or remote programming |
| External Unit Connection Options | |
| Ethernet: | 10/100Mb TCP and UDP Ethernet |
| USB: | 2.0 12Mbit/sec Full-speed |
| EIARS232: | 8-Bit 9600-115200 bps |
| EIARS485: | 8-Bit 9600-115200 bps |
| Encoder Input: | Max 1MHz; 3 differential channels as A, B ve Z |
| Digital Inputs: | 4, each one with 18-36V range upto 1KHz |
| Pulse Outputs: | 2 differential 5VDC 1MHz and 5VDC 1KHz |
| Analog Output: | Programmable 16-Bit, 0-10V or ±10V |
| Relay Outputs: | 4 with 24VDC/2A ratings |
| General | |
| Power Input: | 18-36 VDC |
| Power Consumption: | Max 10VA |
| Operating Temperature: | -10ºC / +40ºC |
| Storage Temperature: | -25º C /+70ºC |
| Dimensions: | 130*233*51 mm (W*L*D) |
| Panel Cut Dimensions: | 110*209 (W*B) |
| Weight: | 575 Grams |
×
Analog Signal Converter
- 4 channels with simultaneous conversion
-
Programmable features of each channel
- 19 bit resolution
- Absolute or Proportional conversion and Selectable gain
- Conversion and Display Speed
- Filter parameters
- 5VDC and 12 VDC sensor supply voltage
- 2-12 point calibration to correct the deviations caused by the applied system or calibration with previously saved values
- Load, Force, Pressure, Strain, Elongation etc. direct connection to a wide variety of sensors
Internal Control
- 200Hz per second real-time control conversion
- Auto-tunning with fuzzy logic or User-defined PID(Fuzzy-PID)
- Control outputs in various forms
Built-in HMI
-
TFT LCD screen
- 7”, 800x480 pixel
- Color at 18 bit depth
- High durability resistive touch
- User-friendly graphical display
- Multiple password protected user defined parameters
- Records of tests to be used in analyzes or similar processes
Internal Input Output Units
- Two high-speed differential pulse outputs to maximize the performance of servo or step motor drivers
- 16-Bit 0-10V output with 16 bit resolution for AC inverter
- 0-10V output with 16 bit resolution for AC inverter
- 6-bit resolution +10/-10V output for Servo or Proportional valve
- External stepper motor driver control
- High speed differential encoder reader
-
Encoder input
- For Speed, Acceleration, Torque or Position control
- Resolution of up to 10000 pulses/revolution
- Incremental or Absolute
- Signals can be differential or single-ended
Ready-to-use solutions
With a wide range of ready-to-use applications for universal testing machines and systems, it saves time in product presentation to the market.- Electromechanical Creep / Stress / Relaxation
- CBR, Marshall, Triaxial, Multiplex
- Automatic Consolidation
- Soil or Stone test (Direct Shear)
- Manhole Cover
- Electromechanical or Hydraulic Fatigue
- Test Iron Pellets/Balls
- Solutions for your different Static or Dynamic special applications
Other features
- All operations can be carried out easily via the touch graphic screen.
- Being able to both display and control according to different unit systems (kN, Kg/Ton, Lb); It can be used all over the world and its application areas are quite wide.
- Graphical (Load-Time, Load-Speed-Elongation, etc.) real-time display of the experiments on the screen
- Keeping real-time records of the experiments, allowing simultaneous examination or comparison of more than one experiment on the same graphic screen later on
- Transferring the recordings to external Flash disk via USB port as well as being taken with Ethernet connection when requested.
- Real-time data communication over Ethernet line is very fast, more than one TMC742 can be used in a common network without any data loss.
- With the RS485 communication interface, both the element to be controlled and the analog and digital data input/output capacities can be easily increased
- Output to standard printers with RS232 communication
- High security wireless connection option
| Each Channel Analog Front End | |
| Accuracy Class: | III, ≤10 000 divisions at 10 samples/s |
| A-D Converter: | 24-bit low-noise Delta-Sigma |
| Resolution: | Max 100 000 steps |
| Conversion Rate: | Max 1024 Conversions/Second |
| Linearity: | ≤ 0.0020TS% |
| Minimum Input Sensitivity: | 0.3uV |
| Input Level: | Max ±15 mV |
| Zero Deviation: | ≤ ±3ppm/ ºC |
| Gain Deviation: | ≤ ±6ppm/ ºC |
| Sensor Excitation: | 5VDC/25 mA, 12VDC/50mA |
| Human Machine Interface(HMI) | |
| Display: | 18-bit, 800*480 TFT |
| Activektif Area: | 86*154 mm (H*L) |
| Color: | 18-Bit RGB |
| Touch: | High strength 4-Wire Resistive |
| Keys: | High strength 4 pcs. |
| Programming and Calibration | |
| Digital Filter: | 8 steps |
| Calibration: | Selectable 2-12 points or previous saved values |
| Parameters: | Local or remote programming |
| External Unit Connection Options | |
| Ethernet: | 10/100Mb TCP and UDP Ethernet |
| USB: | 2.0 12Mbit/sec Full-speed |
| EIARS232: | 8-Bit 9600-115200 bps |
| EIARS485: | 8-Bit 9600-115200 bps |
| Encoder Input: | Max 1MHz; 3 differential channels as A, B ve Z |
| Digital Inputs: | 4, each one with 18-36V range upto 1KHz |
| Pulse Outputs: | 2 differential 5VDC 1MHz and 5VDC 1KHz |
| Analog Output: | Programmable 16-Bit, 0-10V or ±10V |
| Relay Outputs: | 4 with 24VDC/2A ratings |
| General | |
| Power Input: | 18-36 VDC |
| Power Consumption: | Max 10VA |
| Operating Temperature: | -10ºC / +40ºC |
| Storage Temperature: | -25º C /+70ºC |
| Dimensions: | 130*233*51 mm (W*L*D) |
| Panel Cut Dimensions: | 110*209 (W*S) |
| Weight: | 575 Grams |
×
×
Realizing all control algorithms and functions within itself, without using external Programable Logic Control (PLC)...
×
Internal Control
- 200Hz per second real-time control conversion
- Auto-tunning with fuzzy logic or User-defined PID(Fuzzy-PID)
- Control outputs in various forms
×
| Each Channel Analog Front End | |
| Accuracy Class: | III, ≤10 000 divisions at 10 samples/s |
| A-D Converter: | 24-bit low-noise Delta-Sigma |
| Resolution: | Max 100 000 steps |
| Conversion Rate: | Max 1024 Conversions/Second |
| Linearity: | ≤ 0.0020TS% |
| Minimum Input Sensitivity: | 0.3uV |
| Input Level: | Max ±15 mV |
| Zero Deviation: | ≤ ±3ppm/ ºC |
| Gain Deviation: | ≤ ±6ppm/ ºC |
| Sensor Excitation: | 5VDC/25 mA, 12VDC/50mA |
| Human Machine Interface(HMI) | |
| Display: | 18-bit, 800*480 TFT |
| Activektif Area: | 86*154 mm (H*L) |
| Color: | 18-Bit RGB |
| Touch: | High strength 4-Wire Resistive |
| Keys: | High strength 4 pcs. |
| Programming and Calibration | |
| Digital Filter: | 8 steps |
| Calibration: | Selectable 2-12 points or previous saved values |
| Parameters: | Local or remote programming |
| External Unit Connection Options | |
| Ethernet: | 10/100Mb TCP and UDP Ethernet |
| USB: | 2.0 12Mbit/sec Full-speed |
| EIARS232: | 8-Bit 9600-115200 bps |
| EIARS485: | 8-Bit 9600-115200 bps |
| Encoder Input: | Max 1MHz; 3 differential channels as A, B ve Z |
| Digital Inputs: | 4, each one with 18-36V range upto 1KHz |
| Pulse Outputs: | 2 differential 5VDC 1MHz and 5VDC 1KHz |
| Analog Output: | Programmable 16-Bit, 0-10V or ±10V |
| Relay Outputs: | 4 with 24VDC/2A ratings |
| General | |
| Power Input: | 18-36 VDC |
| Power Consumption: | Max 10VA |
| Operating Temperature: | -10ºC / +40ºC |
| Storage Temperature: | -25º C /+70ºC |
| Dimensions: | 130*233*51 mm (W*L*D) |
| Panel Cut Dimensions: | 110*209 (W*S) |
| Weight: | 575 Grams |
Fully graphical user interface powered by customized Linux operating system without using external HMI...
×
Built-in HMI
-
TFT LCD screen
- 7”, 800x480 pixel
- Color at 18 bit depth
- High durability resistive touch
- User-friendly graphical display
- Multiple password protected user defined parameters
- Records of tests to be used in analyzes or similar processes
×
| Each Channel Analog Front End | |
| Accuracy Class: | III, ≤10 000 divisions at 10 samples/s |
| A-D Converter: | 24-bit low-noise Delta-Sigma |
| Resolution: | Max 100 000 steps |
| Conversion Rate: | Max 1024 Conversions/Second |
| Linearity: | ≤ 0.0020TS% |
| Minimum Input Sensitivity: | 0.3uV |
| Input Level: | Max ±15 mV |
| Zero Deviation: | ≤ ±3ppm/ ºC |
| Gain Deviation: | ≤ ±6ppm/ ºC |
| Sensor Excitation: | 5VDC/25 mA, 12VDC/50mA |
| Human Machine Interface(HMI) | |
| Display: | 18-bit, 800*480 TFT |
| Activektif Area: | 86*154 mm (H*L) |
| Color: | 18-Bit RGB |
| Touch: | High strength 4-Wire Resistive |
| Keys: | High strength 4 pcs. |
| Programming and Calibration | |
| Digital Filter: | 8 steps |
| Calibration: | Selectable 2-12 points or previous saved values |
| Parameters: | Local or remote programming |
| External Unit Connection Options | |
| Ethernet: | 10/100Mb TCP and UDP Ethernet |
| USB: | 2.0 12Mbit/sec Full-speed |
| EIARS232: | 8-Bit 9600-115200 bps |
| EIARS485: | 8-Bit 9600-115200 bps |
| Encoder Input: | Max 1MHz; 3 differential channels as A, B ve Z |
| Digital Inputs: | 4, each one with 18-36V range upto 1KHz |
| Pulse Outputs: | 2 differential 5VDC 1MHz and 5VDC 1KHz |
| Analog Output: | Programmable 16-Bit, 0-10V or ±10V |
| Relay Outputs: | 4 with 24VDC/2A ratings |
| General | |
| Power Input: | 18-36 VDC |
| Power Consumption: | Max 10VA |
| Operating Temperature: | -10ºC / +40ºC |
| Storage Temperature: | -25º C /+70ºC |
| Dimensions: | 130*233*51 mm (W*L*D) |
| Panel Cut Dimensions: | 110*209 (W*S) |
| Weight: | 575 Grams |
Direct connection to Servo/Proportional Valve, AC/DC Servo/Step motor drives without using external inverter...
×
Internal Input Output Units
- Two high-speed differential pulse outputs to maximize the performance of servo or step motor drivers
- 16-Bit 0-10V output with 16 bit resolution for AC inverter
- 0-10V output with 16 bit resolution for AC inverter
- 6-bit resolution +10/-10V output for Servo or Proportional valve
- External stepper motor driver control
- High speed differential encoder reader
- Encoder input
- For Speed, Acceleration, Torque or Position control
- Resolution of up to 10000 pulses/revolution
- Incremental or Absolute
- Signals can be differential or single-ended
×
| Each Channel Analog Front End | |
| Accuracy Class: | III, ≤10 000 divisions at 10 samples/s |
| A-D Converter: | 24-bit low-noise Delta-Sigma |
| Resolution: | Max 100 000 steps |
| Conversion Rate: | Max 1024 Conversions/Second |
| Linearity: | ≤ 0.0020TS% |
| Minimum Input Sensitivity: | 0.3uV |
| Input Level: | Max ±15 mV |
| Zero Deviation: | ≤ ±3ppm/ ºC |
| Gain Deviation: | ≤ ±6ppm/ ºC |
| Sensor Excitation: | 5VDC/25 mA, 12VDC/50mA |
| Human Machine Interface(HMI) | |
| Display: | 18-bit, 800*480 TFT |
| Activektif Area: | 86*154 mm (H*L) |
| Color: | 18-Bit RGB |
| Touch: | High strength 4-Wire Resistive |
| Keys: | High strength 4 pcs. |
| Programming and Calibration | |
| Digital Filter: | 8 steps |
| Calibration: | Selectable 2-12 points or previous saved values |
| Parameters: | Local or remote programming |
| External Unit Connection Options | |
| Ethernet: | 10/100Mb TCP and UDP Ethernet |
| USB: | 2.0 12Mbit/sec Full-speed |
| EIARS232: | 8-Bit 9600-115200 bps |
| EIARS485: | 8-Bit 9600-115200 bps |
| Encoder Input: | Max 1MHz; 3 differential channels as A, B ve Z |
| Digital Inputs: | 4, each one with 18-36V range upto 1KHz |
| Pulse Outputs: | 2 differential 5VDC 1MHz and 5VDC 1KHz |
| Analog Output: | Programmable 16-Bit, 0-10V or ±10V |
| Relay Outputs: | 4 with 24VDC/2A ratings |
| General | |
| Power Input: | 18-36 VDC |
| Power Consumption: | Max 10VA |
| Operating Temperature: | -10ºC / +40ºC |
| Storage Temperature: | -25º C /+70ºC |
| Dimensions: | 130*233*51 mm (W*L*D) |
| Panel Cut Dimensions: | 110*209 (W*S) |
| Weight: | 575 Grams |
Numerous ready-to-use applications without the need for special software engineers...
×
Ready-to-use solutions
With a wide range of ready-to-use applications for universal testing machines and systems, it saves time in product presentation to the market.- Electromechanical Creep / Stress / Relaxation
- CBR, Marshall, Triaxial, Multiplex
- Automatic Consolidation
- Soil or Stone test (Direct Shear)
- Manhole Cover
- Electromechanical or Hydraulic Fatigue
- Test Iron Pellets/Balls
- Solutions for your different Static or Dynamic special applications
×
| Each Channel Analog Front End | |
| Accuracy Class: | III, ≤10 000 divisions at 10 samples/s |
| A-D Converter: | 24-bit low-noise Delta-Sigma |
| Resolution: | Max 100 000 steps |
| Conversion Rate: | Max 1024 Conversions/Second |
| Linearity: | ≤ 0.0020TS% |
| Minimum Input Sensitivity: | 0.3uV |
| Input Level: | Max ±15 mV |
| Zero Deviation: | ≤ ±3ppm/ ºC |
| Gain Deviation: | ≤ ±6ppm/ ºC |
| Sensor Excitation: | 5VDC/25 mA, 12VDC/50mA |
| Human Machine Interface(HMI) | |
| Display: | 18-bit, 800*480 TFT |
| Activektif Area: | 86*154 mm (H*L) |
| Color: | 18-Bit RGB |
| Touch: | High strength 4-Wire Resistive |
| Keys: | High strength 4 pcs. |
| Programming and Calibration | |
| Digital Filter: | 8 steps |
| Calibration: | Selectable 2-12 points or previous saved values |
| Parameters: | Local or remote programming |
| External Unit Connection Options | |
| Ethernet: | 10/100Mb TCP and UDP Ethernet |
| USB: | 2.0 12Mbit/sec Full-speed |
| EIARS232: | 8-Bit 9600-115200 bps |
| EIARS485: | 8-Bit 9600-115200 bps |
| Encoder Input: | Max 1MHz; 3 differential channels as A, B ve Z |
| Digital Inputs: | 4, each one with 18-36V range upto 1KHz |
| Pulse Outputs: | 2 differential 5VDC 1MHz and 5VDC 1KHz |
| Analog Output: | Programmable 16-Bit, 0-10V or ±10V |
| Relay Outputs: | 4 with 24VDC/2A ratings |
| General | |
| Power Input: | 18-36 VDC |
| Power Consumption: | Max 10VA |
| Operating Temperature: | -10ºC / +40ºC |
| Storage Temperature: | -25º C /+70ºC |
| Dimensions: | 130*233*51 mm (W*L*D) |
| Panel Cut Dimensions: | 110*209 (W*S) |
| Weight: | 575 Grams |
Wide range of Communication such as Ethernet, USB, RS485, RS232, internal and external recording…
×
Other features
- All operations can be carried out easily via the touch graphic screen.
- Being able to both display and control according to different unit systems (kN, Kg/Ton, Lb); It can be used all over the world and its application areas are quite wide.
- Graphical (Load-Time, Load-Speed-Elongation, etc.) real-time display of the experiments on the screen
- Keeping real-time records of the experiments, allowing simultaneous examination or comparison of more than one experiment on the same graphic screen later on
- Transferring the recordings to external Flash disk via USB port as well as being taken with Ethernet connection when requested.
- Real-time data communication over Ethernet line is very fast, more than one TMC742 can be used in a common network without any data loss.
- With the RS485 communication interface, both the element to be controlled and the analog and digital data input/output capacities can be easily increased
- Output to standard printers with RS232 communication
- High security wireless connection option
×
| Each Channel Analog Front End | |
| Accuracy Class: | III, ≤10 000 divisions at 10 samples/s |
| A-D Converter: | 24-bit low-noise Delta-Sigma |
| Resolution: | Max 100 000 steps |
| Conversion Rate: | Max 1024 Conversions/Second |
| Linearity: | ≤ 0.0020TS% |
| Minimum Input Sensitivity: | 0.3uV |
| Input Level: | Max ±15 mV |
| Zero Deviation: | ≤ ±3ppm/ ºC |
| Gain Deviation: | ≤ ±6ppm/ ºC |
| Sensor Excitation: | 5VDC/25 mA, 12VDC/50mA |
| Human Machine Interface(HMI) | |
| Display: | 18-bit, 800*480 TFT |
| Activektif Area: | 86*154 mm (H*L) |
| Color: | 18-Bit RGB |
| Touch: | High strength 4-Wire Resistive |
| Keys: | High strength 4 pcs. |
| Programming and Calibration | |
| Digital Filter: | 8 steps |
| Calibration: | Selectable 2-12 points or previous saved values |
| Parameters: | Local or remote programming |
| External Unit Connection Options | |
| Ethernet: | 10/100Mb TCP and UDP Ethernet |
| USB: | 2.0 12Mbit/sec Full-speed |
| EIARS232: | 8-Bit 9600-115200 bps |
| EIARS485: | 8-Bit 9600-115200 bps |
| Encoder Input: | Max 1MHz; 3 differential channels as A, B ve Z |
| Digital Inputs: | 4, each one with 18-36V range upto 1KHz |
| Pulse Outputs: | 2 differential 5VDC 1MHz and 5VDC 1KHz |
| Analog Output: | Programmable 16-Bit, 0-10V or ±10V |
| Relay Outputs: | 4 with 24VDC/2A ratings |
| General | |
| Power Input: | 18-36 VDC |
| Power Consumption: | Max 10VA |
| Operating Temperature: | -10ºC / +40ºC |
| Storage Temperature: | -25º C /+70ºC |
| Dimensions: | 130*233*51 mm (W*L*D) |
| Panel Cut Dimensions: | 110*209 (W*S) |
| Weight: | 575 Grams |
The coefficients used while executing the PID algorithm are obtained by the auto-tuning method, the system has the optimum PID coefficients and guarantees the minimum error. In cases where the application does not allow auto-tuning, which is very exceptional, the appropriate PID coefficients are determined by the user and applied to the control system powered by fuzzy logic PID (Fuzzy-PID).